Configuring The Refresh Rate - Toshiba e-STUDIO 281C Printing Manual

4. Monitoring Print Jobs
2) Method

— Configuring the Refresh Rate

The Refresh Rate tab lets you change the refresh rate for document notification, printer
status, and print queue.
1
2
1) Item/Refresh Rate
2) [Restore Defaults]
3) [Change Rate...]
Changing the refresh rate
The Document Notification, Printer Status, and Print Queue dialog box appears when
clicking [Change Rate...] in the Refresh Rate tab of the configuration dialog box.
When the dialog box appears, select the desired refresh rate using the slide bar. The
available range of the refresh rate varies for each item.
Document Notification
You can set the refresh rate from 0 second to 1 minute in units of 10 seconds. The
default refresh rate for the document notification is 30 seconds.
320
- Printer requires attention — Check this to notify you when the printer requires
immediate attention.
- Toner is Empty — Check this to notify you when a toner is empty.
- Used Toner Container is full — Check this to notify you when the used toner
container is full.
This sets how TopAccessDocMon notifies you when events occur.
- Popup Dialog — Check this for a popup dialog box.
- Audio (Beep) — Check this for a beep sound.
This list displays the refresh rate settings for each item. You can change the refresh
rate by selecting the item in this list and clicking [Change Rate...].
Click this to restore the default refresh rate for each item.
Select an item in the list and click it to change the refresh rate. The Document Noti-
fication, Printer Status, and Print Queue dialog box appears.
P.320 "Changing the refresh rate"
Printing Guide — Monitoring Print Jobs with TopAccessDocMon
3