Installation For Smb Printing By Add Printer Wizard; Windows 98/Me - Toshiba e-STUDIO 281C Printing Manual

Installation for SMB Printing by Add Printer Wizard

The procedure to install the printer driver for SMB printing by Add Printer Wizard differs
depending on the version of the Windows being used.
NOTE: It assumes using SMB printing in a small network. If you can use the Windows NT 4.0,
Windows 2000, Windows XP, or Windows Server 2003 as a print server, it is recom-
mended to set up for printing via Windows print server. For further information about
setting up printing via a Windows print server, see the Network Administration Guide.
SUPPLEMENTS: •
•

— Windows 98/Me

Installing the printer driver for SMB printing by Add Printer Wizard
The following describes an installation on Windows 98. The procedure is the same
when Windows Me is used.
1.
2.
Printing Guide — Installing Client Software for Windows
P.99 "Windows 98/Me"
P.101 "Windows NT 4.0"
P.106 "Windows 2000/XP/Server 2003"
TopAccessDocMon is also available for SMB printing. To install TopAccessDocMon,
you must install it from the Client Utilities CD-ROM separately.
The Agfa Font Manager is also available to install and manage the TrueType fonts
on your computer. To install the Agfa Font Manager, you must install it from the Cli-
ent Utilities CD-ROM separately.
Install the printer driver by Add Printer Wizard.
• Please install the printer driver following the instruction of the installation for
parallel printing.
P.40 "Installation for Parallel Printing by Add Printer Wizard"
After installing the client software, click [Start], select [Set-
tings], and click [Printers] to open the Printers folder.
2. Installing Client Software
99