Output Bin; Hole Punching - Toshiba e-STUDIO 281C Printing Manual

3. Printing
Option Value
staple=4
staple=5
staple=6
staple=7
staple=8
staple=9
If this option is not specified, the printer's default value will be used.
Example: The command to staple in the upper left corner of a long edge feed portrait
page is "lp –o staple=1 filename".
The value for the stapling position depends on the paper size, the paper feed direction,
and the print direction. This function is not available for all paper sizes and the users
should refer to the copier manual for a list of compatible paper sizes. In particular, A5,
A6 and statement paper sizes will not work with this function.

— Output Bin

The output bin can be specified using the following options.
Option Value
inner
bin1
bin2
If the finisher option is not installed on the equipment, the default output tray will be
used (inner). If the finisher option is installed on the equipment, the default output tray
will be used (bin2).
Example: The command to specify output bin 1 is "lp –o bin1 filename".

— Hole Punching

When the hole punch option is installed it can be activated using the following option.
Option Value
punch=0
300
Alternate Value
Staple in the top right corner of a portrait page and the
bottom right corner of a landscape page.
Put 2 staples on the right side of a portrait page or the
bottom side of a landscape page printed on long-edge-
feed paper. This command has no affect when the
paper is fed from the short-edge side.
Staple in the bottom right corner of a portrait page and
the lower left corner of a landscape page.
Put 2 staples on the top side of a portrait page or the
right side of a landscape page printed on short-edge-
feed large format (A3/Ledger) paper. This command
has no affect when the paper is fed from the long-edge
side or small paper size.
Put 2 staples on the bottom side of a portrait page or
the left side of a landscape page printed on short-edge-
feed large format (A3/Ledger) paper. This command
has no affect when the paper is fed from the long-edge
side or small paper size.
Put 2 staples in the middle of a landscape page and fold
the paper in half vertically along the staple line (saddle
stitching). This command works in conjunction with
booklet printing. This command has no affect when the
paper is fed from the long-edge side.
Alternate Value
Select the inner tray.
Select the upper output tray of the finisher.
Select the lower output tray of the finisher.
Alternate Value
nopunch Hole punching is turned off.
Description
Description
Description
Printing Guide — Printing from UNIX