Pcl5E Specific Options; Text Wrapping; Left Margin; Right Margin - Toshiba e-STUDIO 281C Printing Manual

Example: The command to set the black over print mode for the print job is
"lp -o blackoverprint=1 filename"

PCL5e Specific Options

Some of the options only apply to plain text or PCL5e files.

— Text Wrapping

The following options control text wrapping when it reaches the right margin.
Option Value
wrap
nowrap
If this option is not specified the command will not be sent so the printer's default value
will be used.
Example: The command to specify wrapping is "lp –o wrap filename".

— Left Margin

The left margin position can be specified with the following option.
Option Value
lm=value
If the left margin is set to the right of the right margin it will be ignored.
If this option is not specified the command will not be sent so the printer's default value
will be used.
Example: The command to set the left margin to five columns is "lp –o lm=5 filename".

— Right Margin

The right margin position can be specified with the following option.
Option Value
rm=value
If the right margin is set to the left of the left margin or if it is set to a position wider than
the logical page it will be ignored. The right margin is specified in columns from the left
margin. A negative value will be ignored.
If this option is not specified the command will not be sent so the printer's default value
will be used.
Example: The command to set the right margin to fifty columns is
"lp –o rm=50 filename".

— Top Margin

The top margin position can be specified with the following option.
Option Value
tm=value
Printing Guide — Printing from UNIX
3. Printing
Alternate Value
Enable automatic text wrapping.
Disable automatic text wrapping.
Alternate Value
Set the left margin to value columns.
Alternate Value
Set the right margin to value columns.
Alternate Value
Set the top margin to value lines.
Description
Description
Description
Description
309