Toshiba e-STUDIO 281C Printing Manual page 171

Creating a print queue manually on HP-UX
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Creating a print queue manually on IBX AIX
1.
2.
3.
Printing Guide — Installing Client Software for UNIX
Log on to the root account.
Open your Linux/UNIX editor.
Create the following file.
/etc/lp/interfaces/<queue name>.conf
Add a line as below in the <queue name>.conf.
dest=<IP address>
Save the file.
Enter the following command:
chmod +x <queue name>.conf
Enter the following command:
chown lp:lp <queue name>.conf
Enter the following command:
ps -ef | grep lpsched | grep -iv grep > /dev/null 2>&1
Enter the following command:
Echo $?
If "0" is outputted on the screen, turn the scheduler OFF.
Enter the following command:
/usr/sbin/lpshut > /dev/null 2>&1
Enter the following command:
/usr/sbin/lpadmin -p <queue name> -v /dev/null \
-m net_est451c -o rm <queue name> -orpdssc -ob3
Enter the following command:
accept <queue name>
Enter the following command:
enable <queue name>
If you turn OFF the scheduler in step 10, turn the scheduler
ON. Enter the following command:
/usr/lpsched > /dev/null 2>&1
Enter the following command:
ls /opt/toshiba/tap/filter
If the above directory does not exist, enter the following
command:
mkdir /opt/toshiba/tap/filter
Log on to the root account.
2. Installing Client Software
171