Toshiba e-STUDIO 281C Printing Manual page 354

5. Troubleshooting
Printer Error
354
Status Details
Finisher Disconnected -
Please Join Finisher to
Copier.
Hole Punch Jam in Finisher -
Please Clear Hole Punch
Staple Jam in Finisher -
Please Clear Staple
Staple Jam in Lower Tray of
Finisher - Please Clear Staple
Toner Error - Please Use
Genuine TOSHIBA Toner.
Finisher Lower Tray Full -
Please Remove Paper
Mixed Sized Paper not
Allowed - Please Check
Paper
Finisher Tray 1 Paper Full -
Please Remove Paper.
Finisher Tray 2 Paper Full -
Please Remove Paper.
Inner Tray Paper Full -
Please Remove Paper.
Hole Punch Full in Finisher-
Please Clear Hole Punch.
Job Separator Upper Paper
Full - Please Remove Paper.
Job Separator Lower Paper
Full - Please Remove Paper.
Offset Tray Full - Please
Remove Paper.
Printer Output Error - Please
Contact Service Technician.
Printer Input Error - Please
Contact Service Technician.
Description
Join the Finisher to the copier stably.
Clear hole punches from the Finisher. Refer to
the Operator's Manual for Basic Function
for instruction.
Remove jammed staples from the Finisher.
Refer to the Operator's Manual for Basic
Function for instruction.
Remove jammed staples from the Saddle-
stitch Finisher. Refer to the Operator's Man-
ual for Basic Function for instruction.
Check and adjust the toner bottle.
Remove paper from the Lower Tray of Saddle-
stitch Finisher.
Check the paper.
Remove paper from the Finisher Tray 1.
Remove paper from the Finisher Tray 2.
Remove paper from the Inner Tray.
This error message is only displayed for e-
STUDIO4511 Series, e-STUDIO450 Series,
and e-STUDIO280 Series.
Dispose the punched paper bits. Refer to the
Operator's Manual for Basic Function for
instruction.
Remove paper form the Job Separator Upper
Tray.
This error message is only displayed for e-
STUDIO450 Series, and e-STUDIO280
Series.
Remove paper from the Job Separator Lower
Tray.
This error message is only displayed for e-
STUDIO450 Series, and e-STUDIO280
Series.
Remove paper from the Offset Tray.
This error message is only displayed for e-
STUDIO450 Series, and e-STUDIO280
Series.
Contact your service representative.
Contact your service representative.
Printing Guide — TopAccessDocMon Errors