Toshiba e-STUDIO 281C Printing Manual page 234

3. Printing
NOTES: •
•
•
4) Brightness
5) Saturation
NOTE: The Saturation option is not available when "Mono" is selected at the "Color" drop down
box on the Setup tab.
6) Smoothing
NOTE: The Smoothing option is only available when "Mono" is selected at the "Color" drop
down box on the Setup tab.
7) Distinguish Thin Lines
8) Pure Gray
NOTE: The Pure Gray option is not available when "Mono" is selected at the "Color" drop down
box in the Setup tab.
9) Use Black for All Text
For PS3 Printer Driver
234
"1200 x 600 dpi" is available only when the optional expansion memory is installed
and configured on the Configuration tab.
"1200 x 600 dpi" cannot be selected when "Save to e-Filing" is selected on the Print
Job tab.
The Resolution option is not available when "Mono" is selected at the "Color" drop
down box on the Setup tab.
Enter the percentage of brightness for printing. You can set from -100 (darkest) to
100 (lightest) in units of 1%. You can also set the percentage of brightness by mov-
ing the scroll bar.
Enter the percentage of saturation for printing. You can set from -100 (low clear) to
100 (high clear) in units of 1%. You can also set the percentage of saturation by
moving the scroll bar.
Check this to print the texts and graphics smoothly.
Check this to print thin lines clearly.
Check this to print the contents in gray scale where the percentage of each color —
cyan, magenta, and yellow— is the same percentage (C=M=Y=n% -> K=n%).
Check this to print all texts in 100% black except white texts.
1
2
3
4
5
6
7
8
9
Printing Guide — Printing from Windows