Installing Client Software For Novell Printing - Toshiba e-STUDIO 281C Printing Manual

2. Installing Client Software

Installing Client Software for Novell Printing

This section describes how to install the client software for Novell printing on NetWare
print server environments.
There are three ways to set up the printer drivers for Novell printing:
•
•
•
NOTE: Before installing the printer driver for Novell printing, check with your system adminis-
trator to make sure of the following:
-
-
-
Before installing the client software for Novell printing, please make sure following net-
work services and protocols are installed on your computer:
Windows 98/ME
•
•
•
•
Windows NT 4.0
•
•
•
•
Windows 2000/XP/Server 2003
•
•
118
Using the installer in the Client Utilities CD-ROM
When you insert the Client Utilities CD-ROM into your CD-ROM drive, the installer
automatically starts. You can install printer drivers and other client software using
the installer. If you want to install printer drivers as well as other client software, this
method is convenient.
P.119 "Installation for Novell Printing Using the Installer"
Using Point and Print
You can install the printer driver by double-clicking network queues on the NetWare.
If the NetWare has been set up for NDPS, printer drivers can be downloaded from
the system so that the Client Utilities CD-ROM is not required. However, other client
software cannot be installed using this method.
P.123 "Installation for Novell Printing by Point and Print"
Using Add Printer Wizard
When you want to install the printer drivers without connecting to the equipment
using Point and Print, install the printer drivers using the Add Printer Wizard.
P.130 "Installation for Novell Printing by Add Printer Wizard"
This equipment is connected to the network and turned on.
The NetWare server is configured correctly and running on your network.
The IPX/SPX or TCP/IP, and NetWare settings are correct on this equipment.
TCP/IP protocol (Required only when using the NetWare in the TCP/IP network.)
IPX/SPX-compatible protocol (Required only when using the NetWare in the IPX/
SPX network.)
Client for NetWare Network
Service for NetWare Directory Service (Required only when using the NetWare
server in NDS mode.)
TCP/IP protocol (Required only when using the NetWare in the TCP/IP network.)
NWLink IPX/SPX Compatible Transport protocol (Required only when using the
NetWare in the IPX/SPX network.)
NWLink NetBIOS protocol (Required only when using the NetWare in the IPX/SPX
network.)
Gateway (and Client) Services for NetWare
NWLink IPX/SPX/NetBIOS Compatible Transport Protocol (Required only when
using the NetWare in the IPX/SPX network.)
Gateway (and Client) Services for NetWare
Printing Guide — Installing Client Software for Windows