Configuring The Options Manually - Toshiba e-STUDIO 281C Printing Manual

For Windows NT 4.0
1. After you change the option settings in the [Configuration] tab, click [OK] to close the
2. Select the printer driver and select [Document Defaults] in the [File] menu.
3. Change one of the settings. (For example, change "Number of Copies".)
4. Click [OK] to save changes. Now, the changes that you made in the [Configuration]
5. If required, select [Document Defaults] in the [File] menu and restore the setting that

— Configuring the Options Manually

The following describes an instruction on Windows 2000. The procedure is the same
when other versions of Windows are used.
Setting the configuration tab manually
NOTE: You must log into Windows as a user who has the "Administrators" or "Power Users"
privilege when using Windows NT 4.0, Windows 2000, Windows XP, or Windows
Server 2003.
1.
Printing Guide — Printing from Windows
Properties dialog box.
tab apply correctly in the printer driver.
you changed in Step 3 to the original value and click [OK].
Select the printer driver in the Printers folder. Then click
[File] and select [Properties].
• When you are operating under Windows XP/Server 2003, open the Printers
and Faxes folder to access the printer driver.
• The printer driver properties dialog box appears.
3. Printing
195