Toshiba e-STUDIO 281C Printing Manual page 197

Setting the configuration tab using SNMP communication
NOTE: You must log into Windows as a user who has the "Administrators" or "Power Users"
privilege when using Windows NT 4.0, Windows 2000, Windows XP, or Windows
Server 2003.
1.
2.
NOTE: If the connection to the equipment has not been configured correctly, the message "The
address of your printer could not be located. Would you like to find it?" will be displayed.
If it is displayed, click [Yes] and search for the equipment using the TopAccessDocMon
Local Discovery dialog box. After searching the equipment, the SNMP communication
will be enabled. For the instructions on how to search the equipment, refer to the
instructions of TopAccessDocMon.
Printing Guide — Printing from Windows
Select the printer driver in the Printers folder. Then click
[File] and select [Properties].
• When you are operating under Windows XP/Server 2003, open the Printers
and Faxes folder to access the printer driver.
• The printer driver properties dialog box appears.
Display the [Configuration] tab, check on "Enable SNMP
Communication", and click [Update Now].
• The printer driver starts communicating with system and obtains option set-
tings automatically.
3. Printing
197