Toshiba e-STUDIO 281C Printing Manual page 296

3. Printing
NOTES: •
•
DC (Department Code)
In the DC menu, you can specify your department code, if this equipment is enabled the
department codes. Before specifying the department code, you must check the Depart-
ment Code option in the Printing Modes menu. Then specify the department code in
this menu.
NOTE: This menu is only displayed for Mac OS X 10.2.4 to 10.2.8. When you want to set the
department code in Mac OS X 10.3.x, set in the Print Mode menu.
1
2
3
4
5
SUPPLEMENT: How the equipment performs printing for an invalid department code print job, which no
department code or invalid department code is specified, varies depending on the
Department Code Enforcement setting that can be set from TopAccess Administrator
mode. When the Department Code Enforcement is set to "ON", the invalid department
code print job will be stored in the invalid department code print job list without printing.
When the Department Code Enforcement is set to "Print", the invalid department code
print job will be printed. When the Department Code Enforcement is set to "Delete", the
invalid department code print job will be deleted without printing.
1) Department Code (DC) - Digit 1
296
- Saddle Stitch (Portrait)/Saddle Stitch (Landscape) — Select this to staple
double in the center for a booklet to be printed. Select this only when booklet
printing is performed.
This option cannot be selected if a finisher is not installed.
"Saddle Stitch (Portrait)/Saddle Stitch (Landscape)" can be selected only when the
Saddle-stitch Finisher is installed.
P.288 "Print Mode"
Select the first digit of the department code.
Printing Guide — Printing from Macintosh