4.12.3
MJ-6102 (Hole punch unit)
(1)
Turn OFF the power and unplug the power
cable.
(2)
Take off the connector cover and disconnect
the interface cable of the finisher.
(3)
Open the cover of the hole punch unit.
(4)
Pull the lever to release the lock.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-11
Fig. 4-12
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
4 - 307
Interface cable
Lever
DISASSEMBLY and REPLACEMENT
4