Juniper ACX5448-D Hardware Manual page 30

Figure 17: Management Panel Components on ACX5448-D
7 6
Figure 18 on page 31 shows the management panel components on ACX5448-M routers.
Figure 18: Management Panel Components on ACX5448-M
7 6
1 Management (MGMT) port
—
2 Console (CON) port
—
3 LINK and ST LEDs
—
4 PPS and 10M GPS output ports
—
The management panel consists of the following components:
Status LEDs—ALM, SYS, MST, and ID LEDs
Router product number
Management (MGMT) port— RJ-45 connectors for 10/100/1000BASE-T. See
Router to a Network for Out-of-Band Management" on page
Console (CON) port— RJ-45 connector to support RS-232 serial ports.
Link activity (left LED labeled LINK) and port status (right LED labeled ST) LEDs.
USB port for image updates.
Reset button to reset the device.
Two SMB connector ports that support 1-PPS and 10-MHz timing devices.
5 4
5 4
5 USB port
—
6 RESET button
—
7 Status LEDs
—
1 2
3
1 2
3
"Connect an ACX5400
107.
31