Juniper ACX5448-D Hardware Manual page 136

Ensure that the rack is stable and secured to the building.
Ensure that there is enough space to place the removed router in its new location and along the path
to the new location.
Read "General Safety Guidelines and Warnings" on page
Use the appropriate power-off sequence to safely power off the device. See
Router" on page 137.
Disconnect the power cords.
Ensure that you have disconnected any cables or wires attached to the router ports.
Ensure that you have the following parts and tools available:
A Phillips (+) screwdriver, number 2 or number 3, depending on the size of your rack mounting screws.
To remove an ACX5400 router from a rack or cabinet:
1. Have one person support the weight of the router while another person uses the screwdriver to remove
the front mounting screws that attach the chassis mounting rails to the rack or cabinet.
2. Slowly slide the router out of the rack, with the mounting rails attached to its sides.
3. Use the screwdriver to remove the mounting screws that attach the mounting blades attached to the
rear of the rack or cabinet.
4. Place the removed screws and mounting blades in a labeled bag. You will need them when you reinstall
the chassis.
5. Transport the router to your new location.
159.
"Power Off an ACX5400
139