Port Panel Of An Acx5448-M Router - Juniper ACX5448-D Hardware Manual

LED Behavior for CFP2 Ports
Table 7 on page 36 summarizes the LED port behavior for CFP2 DCO ports.
Table 7: LED behavior for CFP2 ports
Mode Color State
200G Green On
200G Green Flashing
100G Amber On
100G Amber Flashing
Unlit Off
NOTE: The first et- interface in
the et-0/2/2 interface (port 39). Similarly, the second et interface refers to the et-0/2/1 interface
(port 38) or the et-0/2/3 interface (port 39).

Port Panel of an ACX5448-M Router

The port panel of the ACX5448-M router has the following port configurations:
Forty-four 10-Gigabit or 1-Gigabit Ethernet ports (0 through 43) that operate at 10-Gbps speed with
SFP+ transceivers or at 1-Gbps speed when you use SFP optics.
Description
Indicates that the port is up
and the port speed is 200
Gbps but there is no traffic
passing.
Indicates that the port speed
is 200 Gbps, and there is some
activity.
Indicates that the port is up
and the port speed is 100
Gbps but there is no traffic
passing.
Indicates that the port is up
and the port speed is 100
Gbps and there is some
activity.
There is no link on the port.
Table 7 on page 36
First et- Second et-
port status port status
Up Up
Up Up
Up Down
Down Up
Up Down
Down Up
Up Up
Up Up
refers to the et-0/2/0 interface (port 38) or
First et- Second et-
traffic traffic
Off Off
On On
Off Off
Off Off
On Off
Off On
On Off
Off On
36