Table 21: AC Power Cord Specifications (continued)
Country/Region
Switzerland
Taiwan
United Kingdom
Figure 37 on page 57
illustrates the plug on the power cord for some of the countries or regions listed in
Table 21 on page
56.
Figure 37: AC Plug Types
DC Power Supply for ACX5400 Routers
The two power supply modules (PSMs) in ACX5400 routers are hot-removable and hot-insertable
field-replaceable units (FRUs). The PSMs are installed in the router at the factory. The DC power supply
in ACX5448 is 650 W and ACX5448-D and ACX5448-M is 850 W with dual feeds for power resiliency.
You can install replacement PSMs without powering off the router or disrupting the router function.
NOTE:
Both the AFI and AFO PSMs look identical. Be sure to use the correct PSM for your
chassis product model (see
CAUTION:
a PSM with a different airflow is inserted into the chassis.
Figure 38 on page 58
shows the DC PSM in ACX5448 routers.
Electrical Specifications
250 VAC, 10 A, 50 Hz
125 VAC, 11 A and 15 A,
50 Hz
250 VAC, 10 A, 50 Hz
Table 22 on page
58).
Do not mix PSMs with different airflow. The system raises an alarm when
Plug Standards
SEV 6534-2 Type 12G
NEMA 5-15P Type N5-15P
BS 1363/A Type BS89/13
Juniper Model Number
CBL-EX-PWR-C13-SZ
CBL-EX-PWR-C13-TW
CBL-EX-PWR-C13-UK
57