Figure 27: Management Port LEDs on an ACX5448-M Router
1
2
4
3
1
Management (MGMT) port
—
2
Console (CON) port
—
Table 9 on page 41
describes the management port LEDs.
Table 9: Management Port LEDs on ACX5400 Routers
LED
Color
LINK
Green
(Link
Activity;
left)
ST
Green
(Status;
right)
Network Port LEDs on ACX5400 Routers
The ACX5400 routers use bicolored LEDs to indicate link activity on and status of network ports. The link
LED indicates link activity or a fault. The status LED indicates transceiver presence.
Table 10 on page 42
describes how to interpret the SFP+ port LEDs.
State
Blinking or flickering
On steadily
Off
Blinking at an interval of 200 ms
Blinking at an interval of 83 ms
On steadily
3
Status (ST) LED
—
4
Link activity (LINK) LED
—
Description
A link is established, and there is link activity.
A link is established, but there is no link activity.
No link is established, there is a fault, or the link is down.
Indicates that the port speed is 10 Mbps.
Indicates that the port speed is 100 Mbps.
Indicates that the port speed is 1000 Mbps.
41