Figure 110. Removing the front cover
Removing the front cover from a stand-alone 8202-E4B, 8202-E4C,
8202-E4D, or 8205-E6B system
Use this procedure to remove the cover to access components or perform service.
To remove the front cover, complete the following steps:
1. Open the front door (A) by swinging it towards the left as shown in the following figure.
2. Press latch (B) and pull the cover away from the system. The cover has an indentation where you can
hold onto it more easily.
152
Disk drives or solid-state drives