Placing The Rack-Mounted 8202-E4B, 8202-E4C, 8202-E4D, 8205-E6B, 8205-E6C, Or 8205-E6D System Into The Operating Position - IBM 8202-E4B Manual

Figure 121. Placing the system unit in the service position
4. While holding the system unit release latches (A) down on both the left and right sides, pull the
system unit (B) out from the rack until the rails are fully extended and locked.
Figure 122. Locking the system unit in the service position
Placing the rack-mounted 8202-E4B, 8202-E4C, 8202-E4D, 8205-E6B,
8205-E6C, or 8205-E6D system into the operating position
Use this procedure to place the rack-mounted system into the operating position.
161
Common procedures for installable features