Radf Exit Tray - Toshiba e-STUDIO555 Service Manual

15.5.9

RADF exit tray

(1) Take off the RADF front cover.
P.15-15 "15.5.2 RADF front cover"
(2) Take off the RADF rear cover.
P.15-16 "15.5.3 RADF rear cover"
(3) Take off the platen sheet unit.
P.15-19 "15.5.8 Platen sheet unit"
(4) Remove 5 screws.
(5) Remove 1 screw.
(6) Take off the RADF exit tray.
e-STUDIO555/655/755/855
REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
15 - 20
Fig. 15-30
Fig. 15-31
Fig. 15-32