Toshiba e-STUDIO555 Service Manual page 293

Note:
When the cleaning web has been installed,
be sure that the web is tightly reeled.
(4) Remove 2 E-rings, 2 washers, and 2 one-
way bearings. Then take off the web pushing
roller.
Notes:
1. When assembling the unit, be sure that
the one-way bearings are in the correct
directions.
2. Be sure that the web pushing roller rolls
only in the direction of the arrow in the
figure.
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
Fig. 13-20
Washer One-way bearing
Mark side
Web pushing roller
Fig. 13-21
13 - 19
One-way bearing
Mark side Washer
e-STUDIO555/655/755/855
FUSER UNIT
13