Selecting Exit Tray - Toshiba e-studio 2550c Copying Manual

2 HOW TO MAKE COPIES

Selecting exit tray

You can select the exit tray if the finisher or the Inner Tray is installed.
The available exit tray may be restricted depending on copy modes and paper sizes.
Exit tray selection is set at automatic selection by default.
Changing the exit tray
The exit tray currently selected is displayed on the equipment status indication area. To change the exit tray,
press [EXIT TRAY]. Every time you press this, the display changes from the exit tray of the equipment, each
exit tray of the finisher and Inner Tray, and automatic selection in this order.
46 Making Copies
Exit tray auto-selection
indication
Current exit tray
[ EXIT TRAY ] button