Radf Left Cover; Original Tray - Toshiba e-STUDIO555 Service Manual

15.5.5

RADF left cover

(1) Remove the RADF front cover.
P.15-15 "15.5.2 RADF front cover"
(2) Remove the RADF rear cover.
P.15-16 "15.5.3 RADF rear cover"
(3) Remove 2 screws and take off the RADF left
cover.
15.5.6

Original tray

(1) Take off the paper feeder unit.
P.15-24 "15.5.12 Paper feeder unit"
(2) Disconnect 1 connector from the RADF
board.
(3) Remove 1 screw and take off the bushing.
e-STUDIO555/655/755/855
REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
LED3
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
15 - 18
Fig. 15-24
Fig. 15-25
Fig. 15-26