Comparison Of Copy Process To E-Studio550/650/810 - Toshiba e-STUDIO555 Service Manual

3.3

Comparison of Copy Process to e-STUDIO550/650/810

Process
1. Photoconductive drum
• Sensitivity
• Surface potential
2. Charging
3. Surface potential controlling
4. Writing
• Light source
• Light amount
5. Image density control
6. Development
• Magnetic roller
• Auto-toner
• Toner supply
• Toner-empty detection
• Toner
• Developer material
• Developer bias
7. Transfer
• Transfer
• Power supply roller
Separation auxiliary roller
8. Separation
9. Discharging
• Discharging position
• Discharge lamp
• Pre-cleaning discharge
10. Cleaning
• System
• Recovered toner
11. Cleaning brush bias
12. Fusing
• System
• Cleaning
• Heater
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO550/650/810
OD-6510 (OPC drum)
Highly sensitized drum
–700 V (grid voltage –733 V)
Scolotron method (constant current)
Grid output variable
Surface potential sensor
Semiconductor laser
(adjustment not required)
3.8 nJ/mm²
Image quality sensor
Two magnetic rollers
Magnetic bridge-circuit method
Toner cartridge system
(There is a toner recycle system.)
Density detection system
T-6510/6510E/6510D
D-6510
DC-500V + AC
Transfer belt
Power supply roller
none
Transfer belt charging
Separation finger applied
Discharge by exposure after cleaning
Discharge by red LED
None
Blade + Brush
Reuse (by the toner recycle system)
Varistor 430V
Long-life heat roller system
Fuser roller: Fluoroplastic-coated
roller (ø60)
Pressure roller: PFA tube roller
(550/610:ø50, 810:ø60)
Cleaning web
(for fuser roller cleaning)
Pressure roller cleaning felt roller
Pressure roller cleaning metal roller
IH coil (Induction heating system)
ON/OFF control by thermistor
3 - 11
e-STUDIO555/655/755/855
←
←
-490 V (-290 to -890 V)
Grid voltage -500 V (-300 to -900 V)
←
←
←
←
3.9 nJ/mm² (e-STUDIO555/655)
3.0 nJ/mm² (e-STUDIO755/855)
←
←
←
←
←
(There is a toner cartridge empty
detecting system by piezoelectric
type sensor.)
PS-ZT8550/PS-ZT8550E/
PS-ZT6000D/PS-ZT6000C
PS-ZD6000
-394 V (-200 to -800 V) DC + AC
←
←
←
←
←
←
←
←
←
←
←
←
←
Pressure roller: PFA tube roller (ø60)
←
none
none
←
←
e-STUDIO555/655/755/855
COPY PROCESS
3