15.5.38 Original jam access cover opening/closing sensor (SR13)
(1)
Open the original jam access cover.
(2)
Remove 4 screws and take off the sensor
bracket.
(3)
Disconnect 1 connector. Release 2 latches
and take off the original jam access cover
opening/closing sensor.
15.5.39 Feeder lower guide unit
(1)
Take off the original tray.
P.15-18 "15.5.6 Original tray"
(2)
Take off the guide.
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
Fig. 15-117
Fig. 15-118
Fig. 15-119
REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
15 - 49
Original jam access cover
opening/closing sensor
e-STUDIO555/655/755/855
15