Reading End Roller - Toshiba e-STUDIO555 Service Manual

15.5.19 Reading end roller

(1) Take off the RADF front cover.
P.15-15 "15.5.2 RADF front cover"
(2) Take off the RADF rear cover.
P.15-16 "15.5.3 RADF rear cover"
(3) Remove 1 clip and 1 bushing.
(4) Loosen 1 screw.
(5) Remove 1 screw, 1 pulley, 1 bearing and 1
timing belt.
e-STUDIO555/655/755/855
REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
Timing belt
Bearing
Pulley
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
15 - 32
Bushing
Clip
Fig. 15-67
Fig. 15-68
Fig. 15-69