Options - Toshiba e-STUDIO555 Service Manual

1.3

Options

Large Capacity Feeder (LCF)
Finisher
Saddle stitch finisher
Saddle stitch finisher (100 sheets stapling)
Staple cartridge
Finisher guide rail
Hole punch unit
Inserter
Damp heater kit
Fax unit
2nd line for Fax unit
Printer kit
Printer/Scanner kit
Scanner kit
Wireless LAN module
Bluetooth module
Antenna
Data overwrite enabler
e-BRIDGE ID Gate (HID iClass)
e-BRIDGE ID Gate (MIFARE)
Meta scan enabler
External interface enabler
IPsec enabler
Harness kit
* The finisher (MJ-1027/1028) is necessary for the installation of the hole punch unit (MJ-6003N/E/F/
S) and the inserter (MJ-7001).
* The Printer kit (GM-1180), Printer/Scanner kit (GM-2180) and Scanner kit (GM-4180) are optional
for TWD/SAD/ASD/AUD model.
* The antenna (GN-3010) is necessary to enable the wireless LAN module (GN-1050) and the
bluetooth module (GN-2010).
* Up to 2 antennas (GN-3010) can be connected to the wireless LAN module (GN-1050).
* When the wireless LAN module (GN-1050) and the bluetooth module (GN-2010) are installed
together, only 1 antenna (GN-3010) can be connected to each.
* STAPLE-1700 (100 sheets stapling): 3 cases of 5000 staples in a package
STAPLE-1800 (50 sheets stapling): 3 cases of 5000 staples and one exclusive cartridge in a
package
STAPLE-1900 (50 sheets stapling): 3 cases of 5000 staples in a package
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
MP-4004L/A
MJ-1027
MJ-1028
MJ-1029
STAPLE-700 (for MJ-1027/1028)
STAPLE-1700 (for MJ-1029)
STAPLE-1800 (for MJ-1029)
STAPLE-1900 (for MJ-1029)
STAPLE-600 (for saddle stitch)
KN-1017
MJ-6003N/E/F/S
MJ-7001
MF-6000U/E
GD-1250NA/EU/AU/AS/C
GD-1260NA/EU-N/AU/C
GM-1180
GM-2180
GM-4180
GN-1050
GN-2010
GN-3010
GP-1070
KP-2004
KP-2005
GS-1010
GS-1020
GP-1080
GQ-1240 (for coin controller)
GQ-1050 (for card controller)
GQ-1060 (for card controller)
SPECIFICATIONS/ACCESSORIES/OPTIONS/SUPPLIES
1 - 17
e-STUDIO555/655/755/855
1