Original Reading End Sensor (Sr4); Original Intermediate Transport Sensor (Sr9); Original Reading Start Sensor (Sr10) - Toshiba e-STUDIO555 Service Manual

15.5.49 Original reading end sensor (SR4)

(1) Take off the reading end guide.
P.15-22 "15.5.11 Exit guide / Exit/reverse
guide / Reading end guide"
(2) Disconnect 1 connector. Release 2 latches
and take off the original reading end sensor.

15.5.50 Original intermediate transport sensor (SR9)

(1) Take off the reading start guide unit.
P.15-21 "15.5.10 Reading start guide unit"
(2) Release 2 latches and take off the original
intermediate transport sensor.

15.5.51 Original reading start sensor (SR10)

(1) Take off the reading start guide unit.
P.15-21 "15.5.10 Reading start guide unit"
(2) Disconnect 1 connector. Remove 1 screw
and take off the sensor bracket.
e-STUDIO555/655/755/855
REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
Original intermediate transport sensor
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
15 - 56
Fig. 15-138
Fig. 15-139
Fig. 15-140