Reverse Roller - Toshiba e-STUDIO555 Service Manual

15.5.23 Reverse roller

(1) Take off the assembly of the exit guide and
the exit/reverse guide.
P.15-22 "15.5.11 Exit guide / Exit/reverse
guide / Reading end guide"
(2) Remove 2 screws and take off the 2 leaf
springs.
(3) Remove 3 screws and take off the upper
reverse guide.
(4) Take off the original feed motor bracket with
the motor.
P.15-38 "15.5.25 Original feed motor
bracket"
(5) Remove 1 clip, 1 pulley, 1 pin and 1 bushing.
e-STUDIO555/655/755/855
REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
Upper reverse guide
Bushing
Pulley
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
15 - 36
Fig. 15-79
Fig. 15-80
Pin
Clip
Fig. 15-81