(3)
Disconnect 1 connector.
(4)
Remove 3 screws and take off the read
motor.
15.5.27 Read motor bracket
(1)
Take off the RADF rear cover.
P.15-16 "15.5.3 RADF rear cover"
(2)
Loosen 1 screw.
(3)
Disconnect 1 connector.
(4)
Remove 3 screws and take off the read
motor bracket with the motor.
Note:
When installing the read motor bracket, refix
the loosened screw and tighten the belt
tension.
e-STUDIO555/655/755/855
REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
15 - 40
Connector
Fig. 15-90
Fig. 15-91
Connector
Fig. 15-92