Original Reading Start Sensor (Prism) - Toshiba e-STUDIO555 Service Manual

(3) Release 2 latches and take off the original
reading start sensor.
Note:
When replacing the original reading start
sensor, be sure to perform the original
reading start sensor adjustment.
SERVICE HANDBOOK "3.12.8 Original
reading start sensor adjustment"

15.5.52 Original reading start sensor (prism)

(1) Take off the reading start guide unit.
P.15-21 "15.5.10 Reading start guide unit"
(2) Remove 4 screws and take off the stay.
(3) Remove 2 screws and take off the original
reading start sensor prism unit.
Note:
When replacing the original reading start
sensor, be sure to perform the original
reading start sensor adjustment.
SERVICE HANDBOOK "3.12.8 Original
reading start sensor adjustment"
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
Fig. 15-141
Fig. 15-142
Fig. 15-143
REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
15 - 57
e-STUDIO555/655/755/855
15