(3)
Remove 2 screws and take off the sensor
bracket.
(4)
Disconnect 1 connector. Release 2 latches
and take off the original tray sensor.
15.5.46 Original tray width sensor (SR2)
(1)
Take off the original reverse tray.
P.15-19 "15.5.7 Original reverse tray"
(2)
Remove 2 screws and release 8 latches to
take off the original side guide unit.
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
Fig. 15-129
Fig. 15-130
Fig. 15-131
REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
15 - 53
e-STUDIO555/655/755/855
15