Exit/Reverse Roller - Toshiba e-STUDIO555 Service Manual

15.5.21 Exit/reverse roller

(1) Take off the exit/reverse guide.
P.15-22 "15.5.11 Exit guide / Exit/reverse
guide / Reading end guide"
(2) Remove 2 screws and take off the guide.
(3) Remove 1 E-ring, 1 pulley, 1 pin and 1
bushing.
(4) Take off the exit/reverse roller, remove 1 E-
ring and 1 bushing.
e-STUDIO555/655/755/855
REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
Bushing
E-ring
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
15 - 34
Fig. 15-73
Bushing
Pulley
Pin
E-ring
Fig. 15-74
Fig. 15-75