Connecting Communication Cables; Installing And Removing A Memory Card - Delta AH Series Hardware Manual

4.3.6 Connecting Communication Cables

Plug a communication cable in the port on a Motion CPU module, and make sure that the connector of the cable is joined
to the port properly. RS-232 (USB), RS-485 (terminals on the backplane), CN1 and RJ45 cables could be used.

4.3.7 Installing and Removing a Memory Card

 Formatting of a Memory Card
A memory card needs to be formatted before the first use on an AH Motion CPU module. Make sure the file system
you use on formatting the SD card is FAT32.
 SD Slot on a Motion CPU
As shown below, the SD slot is in the middle of the front of a Motion CPU module.
Ch ap te r 4 Ins ta l la tion a nd Wiring
SD slot
4_
4 - 1 5