Vehicle Cradle; Four Slot Spare Battery Charger - Symbol MC70 User Manual

6 - 8 MC70 User Guide

Vehicle Cradle

Troubleshooting the Vehicle Cradle
Table 6-5
Symptom
EDA battery charging Cradle is not receiving
LED does not light up. power.
EDA battery is not EDA was removed from
recharging. the cradle too soon.
Battery is faulty.
EDA is not placed
correctly in the cradle.
Ambient temperature of
the cradle is too warm.
No data transmitted, EDA removed from cradle
or transmitted data during communication.
was incomplete.
No null modem cable was
used.
Incorrect cable
configuration.
Cable missing or
disconnected.

Four Slot Spare Battery Charger

Troubleshooting The Four Slot Spare Battery Charger
Table 6-6
Symptom Possible Cause
Battery not Battery was removed
charging. from the charger or
charger was unplugged
from AC power too soon.
Battery is faulty.
Battery contacts not
connected to charger.
Ambient temperature of
the cradle is too warm.
Possible Cause
Ensure the power input cable is securely connected to the
cradle's power port.
Replace the EDA in the cradle. The standard capacity battery
(1900 mAh) fully charges in less than four hours. The extended
capacity battery (3800 mAh) fully charges in less than eight
hours.
Replace the battery.
Remove the EDA from the cradle, and re-insert correctly. If the
battery still does not charge, contact customer support.
The EDA battery charging LED slowly blinks amber when the
EDA is correctly inserted and charging.
Move to an area where the ambient temperature is between 0
and 35
Replace EDA in cradle and retransmit.
Some external devices require a null modem cable. Retransmit
using a null modem cable.
See the system administrator.
Re-connect cable.
Re-insert the battery in the charger or re-connect the charger's power
supply. The standard capacity battery (1900 mAh) fully charges in less
than four hours. The extended capacity battery (3800 mAh) fully
charges in less than eight hours.
Verify that other batteries charge properly. If so, replace the faulty
battery.
Verify that the battery is seated in the battery well correctly with the
contacts facing down.
Move the cradle to an area where the ambient temperature is between
o
0 C and 35
Action
o
C.
Action
o
C.
o
C