Charging Spare Batteries; Using The Crd 8800 Single-Slot Cradle - Symbol PPT 8800 Product Reference Manual

PPT 8800 with Windows Mobile 2003 Software for Pocket PCs Product Reference Guide

Charging Spare Batteries

A spare battery can be charged using the single-slot cradle(s).
Note: You can also use a UBC adapter to charge spare batteries. Refer to
the UBC 2000 Universal Battery Charge Product Guide for more
information.

Using the CRD 8800 Single-Slot Cradle

The CRD 8800 Single-Slot Serial Cradle charges only the standard battery.
1. Connect the cradle to a power source.
AC Line
Cord
Power
Supply
Figure 1-19. Connecting Power to the CRD 8800 Cradle
2. Insert the battery into the spare battery charging slot on the back of the cradle.
Position it with the charging contacts facing down (over charging pins) and gently
press down on the battery to ensure proper contact.
The spare battery charging LED turns red to indicate that the spare battery is charging. The
battery fully charges in approximately 2 1/2 hours. See
for spare battery charging indications.
1-16
Spare Battery
Charging Slot
Power
Port
Charge LED Indicator on page 1-19