Inserting The Eda Into The Trigger Handle; Removing The Eda; Scanning - Symbol MC70 User Manual

5 - 14 MC70 User Guide

Inserting the EDA into the Trigger Handle

Slide the EDA into the Trigger Handle until it locks in place. The release secures the EDA to the Trigger
Handle.
Inserting the EDA into the Trigger Handle
Figure 5-14

Removing the EDA

To remove the EDA, press the release down and pull the EDA forward.
Release
Removing the EDA
Figure 5-15

Scanning

To scan bar codes:
Start the EDA's scanning application.
1.
Aim the EDA at the bar code.
2.
Release