Bluetooth Connection - Symbol MC70 User Manual

6 - 4 MC70 User Guide

Bluetooth Connection

Troubleshooting Bluetooth Connection
Table 6-2
Problem
EDA cannot find any Too far from other
Bluetooth devices Bluetooth devices.
nearby.
The Bluetooth device(s)
nearby are not turned on.
The Bluetooth device(s)
are not in discoverable
mode.
When trying to The phone remembers the
connect a Bluetooth name and address of the
phone and EDA, the EDA it last paired with via
phone thinks a the Bluetooth radio.
previously paired
EDA is used.
Can't make my You attempted to bond with
Ericsson R520 phone the phone, and when the
discoverable. phone presented a "pairing
query," you entered No.
This prevents the phone
from being discoverable
until it is reset.
There is a delay in the This is normal behavior.
Bluetooth stack
re-initializing during a
resume from
suspend.
Cause
Move closer to the other Bluetooth device(s), within a range of
10 meters.
Turn on the Bluetooth device(s) to find.
Set the Bluetooth device(s) to discoverable mode. If needed,
refer to the device's user documentation for help.
Manually delete the pairing device and name from the phone.
Refer to the phone's user documentation for instructions.
Reset the phone by removing its battery.
No solution required.
Solution