Accepting A Bond; Discovering Services - Symbol MC70 User Manual

3 - 12 MC70 User Guide

Accepting a Bond

When a remote device wants to bond with the EDA, enter a PIN when requested to grant permission.
Ensure that the EDA is set to discoverable and connectable. See Bluetooth Settings on page 3-25.
1.
When prompted to bond with the remote device the PIN Code Request window appears.
PIN Code Request Window
Figure 3-17
In the PIN Code: text box, enter the same PIN entered on the device requesting the bond. The PIN must
2.
be between 1 and 16 characters.
In the Device Name: text box, edit the name of the device requesting the bond, if desired.
3.
Tap OK to create the bond. The EDA can now exchange information with the other device.
4.

Discovering Services

Before using services, first discover remote devices and then bond to those devices.
To determine what services are available on a bonded remote device:
Tap the Bluetooth icon and select Show BTExplorer.
1.
In BTExplorer window, tap and hold on the remote device and select Explore from the pop-up menu.
2.
Discovering Services
Figure 3-18