Waking the EDA
The wakeup conditions define what actions wake up the EDA. These settings are configurable and the factory
default settings shown in
Wakeup Conditions (Default Settings)
Table 2-9
Status
Power Off
(Suspend Mode)
Auto Off
Locking the EDA
Use the Device Lock feature to prevent use of the device. Note that when locked, the EDA does not respond to
screen or keypad input.
To lock the device, tap the Device unlocked icon. The icon changes to locked.
Device Locked/Unlocked Icons
Figure 2-22
Table 2-9
are subject to change/update.
Description
When the EDA suspends by pressing
Power, these actions wake the EDA.
When the EDA suspends by an automatic
power-off function, these actions wake the
EDA.
Using the MC70 2 - 25
Conditions for Wakeup
1. Power button is pressed.
2. AC power added or removed.
3. Cradle/cable connect or disconnect.
Key or scan button is pressed.
Real Time Clock set to wake up.
Incoming phone call (MC7004/7094 only)
1. Power button is pressed.
2. AC power added or removed.
3. Cradle/cable connect or disconnect.
Key or scan button is pressed.
Real Time Clock set to wake up.
Incoming phone call (MC7004/7094 only)