Object Exchange Push Services; Sending A Contact - Symbol MC70 User Manual

Object Exchange Push Services

Object Exchange (OBEX) is a set of protocols that allows sharing objects such as Contacts or pictures using
Bluetooth.
To exchange contact information with another Bluetooth enabled device:
Ensure the EDA is discoverable and connectable. See Bluetooth Settings on page 3-25.
1.
Discover and bond (pair) with the remote device. See Bonding with Discovered Device(s) on page 3-8.
2.
In BTExplorer, select the Remote Devices folder.
3.
Select the Trusted Devices folder.
4.
Tap the remote device folder.
5.
Tap and hold on OBEX Object Push and select Connect. The OBEX Object Push window appears.
6.
In the Action drop-down list, select one of the following options: Send Contact Information, Swap Contact
7.
Information, Fetch Contact Information, or Send a Picture.

Sending a Contact

To send a contact to another device:
Ensure the EDA is discoverable and connectable. See Bluetooth Settings on page 3-25.
1.
Discover and bond (pair) with the remote device. See Bonding with Discovered Device(s) on page 3-8.
2.
In BTExplorer, select the Remote Devices folder.
3.
Select the Trusted Devices folder.
4.
Tap the remote device folder.
5.
Tap and hold on OBEX Object Push and select Connect. The OBEX Object Push window appears.
6.
OBEX Object Push Window
Figure 3-26
In the Action: drop-down list, select Send Contact Information.
7.
Using Bluetooth 3 - 19