Ethernet Setup; Installing Mobiledox Cradle Manager - Symbol MC9000-G Product Reference Manual
For embedded windows ce.net
Hide thumbs
Also See for MC9000-G:
- Product reference manual (646 pages) ,
- Quick start manual (2 pages) ,
- Product reference manual (392 pages)
Table of Contents
Advertisement
4-16
MC9000-G Product Reference Guide for Embedded Windows® CE .NET
Ethernet Setup
The Ethernet connection can only be established with the Four Slot Ethernet cradle. To establish a
connection between the mobile computer and the host computer to communicate over an Ethernet
network, perform the following:
• Install MobileDox Cradle Manager
• Install eConnect
• Mobile computer configuration
• Host computer configuration
• DHCP server configuration
• Cradle configuration.
Installing MobileDox Cradle Manager
MobileDox Cradle Manager software required to configure the Ethernet cradle, it is only used when
establishing an Ethernet connection with the Four Slot Ethernet Cradle.
The Cradle Management software features:
• View cradles that are attached to the network via MobileDox Net
• View cradle status
• Modify cradle settings including:
• IP address settings
• DNS and WINS settings
• Identification settings
• USB port specific settings
• Restart cradles connected to the network via MobileDox Net
• Update the firmware of MobileDox Net.
To install the MobileDox Cradle Management Software on the host computer, download the latest
version of the software from http://devzone.symbol.com. Refer to the instructions included with the
software.
- Quick Links:
- Entering Information
Hide quick links:
Advertisement
Table of Contents
