Removing The Screen Protector; Battery Management - Symbol MC70 User Manual

Removing the Screen Protector

A screen protector is applied to the MC70. Symbol recommends using this to minimize wear and tear. Screen
protectors enhance the usability and durability of touch screen displays.
To remove the screen protector, lift the corner using a thin plastic card, such as a credit card, then carefully lift
it off the display.
Lift Screen
Protector Corner
Removing the Screen Protector
Figure 1-11
CAUTION
Not using a screen protector can affect warranty coverage. To purchase replacement
NOTE
protectors, contact your local account manager or Symbol Technologies, Inc. These include screen
protector installation instructions. Part number: KT-67525-01 Screen Protector 3/pk.

Battery Management

Observe the following battery saving tips:
Leave the EDA connected to AC power at all times when not in use.
•
Set the EDA to turn off after a short period of non-use.
•
Set the backlight to turn off after a short period of non-use.
•
Turn off all wireless activities when not in use.
•
• Power off the EDA when charging to charge at a faster rate.
Do not use a sharp object to remove the protector. Doing so can damage the display.
Getting Started 1 - 11