Function Buttons
The EDA's buttons perform certain functions.
Scan/Action
Button
Up/Down Button
Function Buttons
Figure 2-13
Power: Press the red Power button to turn the EDA screen on and off. The EDA is in suspend mode
•
when the screen is off. For more information, see Powering On the EDA on page 1-8. Also use the
Power button to reset the EDA by performing a warm or cold boot. See Resetting the EDA on page 2-24.
•
Scan/Action: Press to scan bar codes or capture images. See Data Capture on page 2-20.
Or, press to open an application or perform a function. See the Microsoft
5.0 User Guide to set an application to open.
•
Up/Down: Press to increase or decrease the EDA's volume.
•
Action: Press to open an application or perform a function. See the Microsoft
and CE 5.0 User Guide to set an application to open.
Stylus
Use the EDA stylus to select items and enter information. The stylus functions as a mouse.
•
Tap: Touch the screen once with the stylus to press option buttons and open menu items.
•
Tap and Hold: Tap and hold the stylus on an item to see a list of actions available for that item. On the
pop-up menu that appears, tap the action to perform.
•
Drag: Hold the stylus on the screen and drag across the screen to select text and images. Drag in a list to
select multiple items.
Symbol recommends using the spring-loaded tip of the stylus to write on the screen, and
NOTE
the back end of the stylus to tap the screen. Use your finger to press the Power button and
keypad buttons.
Power Button
Using the MC70 2 - 19
Action Button
Scan/Action Button
®
Applications for Mobile and CE
®
Applications for Mobile