Nellcor OxiMax N-65 Service Manual page 55

O M N-65 Service Manual
XI AX
2. Remove the four screws holding the monitor front and rear cases together. See
Figure 5, items 1 through 4.
Figure 5: Monitor Case Screws
Caution: A flex cable runs between the monitor front and rear case
assemblies. Use care when separating the cases. Do not apply stress
to the flex cable.
3. Separate the monitor front and rear case assemblies. See Figure 6.
Caution: Failure to unlock connector J4 on the SpO
removing the front case flex circuit could damage the flex circuit.
1 — Connector J4
Figure 6: Cases Separated
Disassembly Guide
PCB before
2
49