Jump Starting - Acura 2010 RL Owner's Manual

If the Engine Won't Start, Jump Starting
The Starter Operates Normally
In this case, the starter motor's
speed sounds normal, or even faster
than normal, when you turn the
ignition switch to the START (III)
position, but the engine does not run.
Are you using the proper starting
procedure? Refer to
Starting the
Engine on page 397 .
Are you using a properly coded
built-in key or remote? An
improperly coded built-in key or
remote will cause the immobilizer
system indicator in the instrument
panel to blink rapidly (see page
64 ).
Do you have fuel? Check the fuel
gauge; the low fuel indicator may
not be working.
494
There may be an electrical
problem, such as no power to the
fuel pump. Check all the fuses
(see page 506 ).
If you find nothing wrong, you will
need a qualified technician to find
the problem. See Emergency
Towing on page 513 .
2010 RL

Jump Starting

Although this seems like a simple
procedure, you should take several
precautions.
A battery can explode if you do
not follow the correct procedure,
seriously injuring anyone
nearby.
Keep all sparks, open flames,
and smoking materials away
from the battery.
You cannot start your vehicle by
pushing or pulling it.