Table of Contents
Advertisement
U.S.
Canada
Parking Brake and Brake System
Indicator
This indicator has two functions:
It comes on when you turn the
1.
ignition switch to the ON (II)
position. It is a reminder to check
the parking brake. Driving with
the parking brake not fully
released can damage the rear
brakes, axles, and tires.
If you drive without releasing the
parking brake, a beeper will sound,
and you will also see a ''RELEASE
PARKING BRAKE'' message on
the multi-information display (see
page
78
).
2.
If it stays on after you have fully
released the parking brake while
the engine is running, or if it
comes on while driving, it can
indicate a problem in the brake
system. You will also see a
''BRAKE FLUID LOW'' or
''CHECK BRAKE SYSTEM''
message on the multi-information
display. For more information, see
page
508
.
U.S.
Canada
Side Airbag Off Indicator
This indicator comes on when you
turn the ignition switch to the ON
(II) position. If it comes on at any
other time, it indicates that the
passenger's side airbag has
automatically shut off. You will also
see a ''PASSENGER SIDE AIRBAG
OFF'' message on the multi-
information display (see page
For more information, see page
2010 RL
Instrument Panel Indicators
Supplemental Restraint
System Indicator
This indicator comes on briefly when
you turn the ignition switch to the
ON (II) position. If it comes on at
any other time, it indicates a
potential problem with your front
airbags. This indicator will also alert
you to a potential problem with your
side airbags, passenger's side airbag
automatic cutoff system, side curtain
airbags, automatic seat belt
tensioners driver's seat position
sensor, the front passenger's weight
sensors, or, on models with ACC,
seat belt e-pretensioners. You will
also see a ''CHECK AIRBAG
SYSTEM'' message on the multi-
information display (see page
79
).
For more information, see page
35
.
79
).
34
.
63
Advertisement
Chapters
Table of Contents
