Acura 2010 RL Owner's Manual page 242

2. Insert a disc into the disc slot
when the disc load indicator turns
green, and ''LOAD'' appears on
the upper display at the same time.
Insert the disc only about halfway;
the drive will pull it in the rest of
the way. You will see the disc
number blinking on the upper
display, and the disc load indicator
turns red again and blinks as the
disc is loaded.
Do not try to insert a disc until
''LOAD'' appears. You could
damage the audio unit.
EMPTY POSITION
You can load a disc into an empty
position while a disc is playing. Press
the AUDIO button to view the audio
control display. Select the empty
position (''No Disc'' is shown on the
audio control display) by rotating the
interface dial. Then press ENTER on
the selector to enter your selection.
The current disc stops playing and
starts the loading sequence. The disc
just loaded will play.
2010 RL
Audio System
You can also select the empty
position by pressing the appropriate
preset button.
You can load a disc(s) in any mode
(AM, FM, XM, or AUX) if you do not
select an empty position.
You cannot select the empty position
if there is no disc in the changer.
239