Table of Contents
Advertisement
Audio System
RDS CATEGORY
Turn the selector to select an RDS
category. You can use the search or
scan function to find radio stations
on the selected RDS category by
pressing the selector to the right
repeatedly. Press ENTER to set your
selection. If you do nothing while the
RDS category is selected, the
selected category is canceled.
220
RDS CATEGORY
You can also select an RDS category
with the TUNE bar. Press either side
(
or
) of the TUNE bar to
display an RDS category in the
display. Select a category by pressing
either side of the bar.
2010 RL
RDS Program Search
This function searches up and down
a frequency for the strongest signal
from the frequencies that carry the
selected RDS category information.
This can help you to find a station in
your favorite category. To activate it,
press and release either side
(
or
) of the SEEK/SKIP
bar. You will also see the selected
RDS category name blinking in the
display while searching it. When the
system finds a station, the selected
RDS category name will be displayed
again for about 5 seconds in the
upper display.
If the system does not find a station,
''NOTHING'' will be blinking for
about 5 seconds, then the system
goes back to the last selected station.
Advertisement
Chapters
Table of Contents
