Acura 2010 RL Owner's Manual page 285

Compass System (U.S. model without navigation system)
Trip Button
Press this button to display the
Computer screen (see page
Set Up Button
Press the button to display the set up
screen (see page ) to change and
293
update information in the system.
(Display Mode) Button
This button switches the display
between day mode, night mode, and
off (see page 298 ).
Cancel Button
Press this button to cancel the
current screen and return to the
previous screen.
282
Interface Dial
Trip
288 ).
KNOB
Most functions of the compass
system can be accessed with the
interface dial. The interface dial has
two parts: a knob and a selector.
The knob turns left and right. Use it
to make selections or adjustments to
a list or menu on the screen.
The selector can be pushed left,
right, up, down, and in. Use the
selector to scroll through lists, to
2010 RL
select menus, and to highlight menu
items. When you make a selection,
push the center of the selector in
(ENTER) to go to that selection.
ENTER
In almost all cases, you can enter a
selection into the system by pushing
in on the interface selector.
Screen
All selections and instructions are
displayed on the screen.
SELECTOR
Clean the screen with a soft damp
cloth. You may use a mild cleanser
intended for use on liquid crystal
displays (LCDs). Harsher chemicals
may damage the screen.
Upper Display
Shows the radio band, frequency,
volume, the climate control status,
and the time.